B150M Depth/Temperature Transducer (0° tilt)

Part # 000-11456-001

The B150M is a bronze, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8 m (25 ft) in length. This single-channel transducer offers Medium CHIRP for a balance between the great depth penetration of Low CHIRP, and the superior target resolution of High CHIRP.

Key Features

  • 95-155 kHz Medium CHIRP with 26-17° beam width
  • Up to 300 m (1000 ft) range
  • 1 internal broadband ceramic
  • Thru-Hull with bronze housing
  • Suitable for fiberglass and wood hulls
  • Available in 0°, 12°, or 20° tilted versions
  • Ideal for sportfishing and commercial vessels up to 8 m (25 ft) in length
  • Recommended for use with the SonarHub sounder module, Simrad NSS evo2 & NSS sport multifunction displays
USD MSRP:
$379.00
Where To Buy



    Single Channel CHIRP

    Using pulsed transmissions swept across a range of frequencies, CHIRP technology delivers target resolution and depth penetration superior to traditional single-frequency sonar. This single channel CHIRP transducer operates anywhere in the 95-155 kHz Medium CHIRP frequency range, with a 26-17° beam width. The B150M provides an operating depth of up to 300 m (1000 ft).

    Depth/Temperature

    One sensor does it all. Able to measure both depth and temperature in a single package, the B150M simplifies installation and requires just one connection to your echosounder module or multifunction display.

    Deadrise Compensation

    The B150M is also available in 12° and 20° fixed tilt versions to compensate for hull deadrises of 8-15° and 16-24° respectively. With ceramic elements tilted inside the housing to aim the beam straight down without a fairing block, these transducers are able to deliver more accurate depth readings and best cover the area directly beneath your boat.

    Mounting

    With bronze housing, the B150M is suitable for thru-hull mounting in fiberglass and wood hulls. Thru-hull mounting places the transducer in the water on the outside of your boat’s hull; a hole must be drilled for installation. This typically offers the best depth measurement and fishfinding performance.

    Calculate the beamwidth for this transducer

    B150MFrequencyCone AngleBeamwidth
    85 kHz 17°  
    145 kHz 26°  
     
    Depth: Update
    NB: depending on the strength of your transducer pulse